background image

19

Settings

Language:

 text translation in the app to diff erent langu-

age. Tacticool language is made up for your fun.

Dark theme: 

choose white or black application interface

Temperature: 

change mosfet and processor temperatu-

re unit from °C to °F.

Remember password: 

set automatic login to Leviathan.

Turn off  connection by fi re selector: 

if it is ON, then wi-

reless connection will be turned OFF/ON by fast change 

selector from Semi to Auto and back. It is good for gun 

security. It always turns ON when the battery is plug-in. 

When this function is disabled you can always connect.

Overspin detection (Error 100): 

will turn off  the beep 

at error 100 (over spinning - double shot).

Sound signalization:

 allow/deny sounds when maga-

zine is empty, delay between shots and virtual reload. 

Full auto limit: 

is safety feature. It cut off  power after 

100 bb continuous burst on the FULL auto fi re.

Information:

 info about app and fi rmware version. 

Bootloader and Hardware version is constant.

Device name:

 is visible on the list with devices (max. 12 

characters). It disconnects from phone after saved name.

Device password:

 write to the fi rst row old password 

and to other two new password (4 digits) and push SAVE.

Device update:

 fi xes bugs and adds new features. It 

takes cca 30s to fi nish = successful m vibration.

Installation manual: 

link to the latest manual in .pdf.

Support: 

if you have any questions or problems, please

          contact us at email: 

support@jeff tron.cz

.

Содержание Leviathan V3

























Отзывы: