Jefftron Leviathan V3, Руководство по установке

Страница: 7 / 24

6
15. Make sure the screws doesn‘t stick
outside of the gearbox. If yes grind it.
16. Check if aren‘t any parts in contact
with the gearbox around red area.
14.
Insert the Leviathan - V3 instead of the original contacts:
- Check if the Leviathan - V3 is laid flat on the gearbox shell.
- Adjust the Leviathan position to the same distance from sector gear bearing (red line).
- Use large screw with washer (blue arrow) from the package for tightening the board
near the sector gear. If screw doesnt fit into the hole, use stock screw from cut off lever.
- If the gearbox has hole in this place put smaller screw above reset button (green circles).