Jeep Compass, Руководство по эксплуатации

Страница: 134 / 310

SELECT Button
Press and release the SELECT
button for access to main menus,
sub-menus or to select a personal
setting in the setup menu.
DOWN Button
Press and release the DOWN but-
ton to scroll downward through the
sub-menus.
Engine Oil Change Indicator System
— If Equipped
Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change Re-
quired” message will flash in the EVIC display
for approximately five seconds after a single
chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty-cycle based, which
means the engine oil change interval may fluc-
tuate dependent upon your personal driving
style.
Unless reset, this message will continue to
display each time you turn the ignition switch to
the ON/RUN position. To turn off the message
temporarily, press and release the Trip Odom-
eter button on the instrument cluster. To reset
the oil change indicator system (after perform-
ing the scheduled maintenance) refer to the
following procedure.
1. Turn the ignition switch to the ON position.
Do not start the engine.
2. Fully depress the accelerator pedal, slowly,
three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indica-
tor system did not reset. If necessary repeat
this procedure.
Compass/Temperature/Audio
Press and release the COMPASS button to
display one of eight compass headings to indi-
cate the direction the vehicle is facing, the
outside temperature, and the current radio sta-
tion.
For additional information regarding the com-
pass, refer to Personal Settings (Customer-
Programmable Features).
Average Fuel Economy
Shows the average fuel economy since the last
reset. When the fuel economy is reset, the
display will read “RESET” or show dashes for
two seconds. Then, the history information will
be erased, and the averaging will continue from
the last fuel reading before the reset.
Distance To Empty (DTE)
Shows the estimated distance that can be trav-
elled with the fuel remaining in the tank. This
estimated distance is determined by a weighted
average of the instantaneous and average fuel
economy, according to the current fuel tank
level. This is not resettable.
130