Jeep Compass, Руководство по эксплуатации

Страница: 35 / 310

8. Position the shoulder belt on your chest so
that it is comfortable and not resting on your
neck. The retractor will withdraw any slack in
the belt.
9. To release the belt, push the red button on
the buckle.
10. To disengage the mini-latch from the mini-
buckle for storage, insert the regular latch plate
into the black button on the top of the mini-
buckle. The belt will automatically retract to its
stowed position. If necessary, slide the latch
plate down the webbing to allow the belt to
retract fully. Insert the mini-latch plate into the
slot provided in the trim panel.
Lap/Shoulder Belt Untwisting
Procedure
Use the following procedure to untwist a twisted
lap/shoulder belt.
1. Position the latch plate as close as possible
to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the
latch plate, grasp and twist the belt webbing 180
degrees to create a fold that begins immediately
above the latch plate.
3. Slide the latch plate upward over the folded
webbing. The folded webbing must enter the
slot at the top of the latch plate.
4. Continue to slide the latch plate up until it
clears the folded webbing.
Seat Belts In Passenger Seating
Positions
The seat belts in the passenger seating posi-
tions are equipped with Automatic Locking Re-
tractors (ALR) which are used to secure a child
restraint system. For additional information, re-
fer to “Installing Child Restraints Using The
Vehicle Seat Belt” under the “Child Restraints”
section. The chart below defines the type of
feature for each seating position.
Rear Center Seat Belt Buckled Detaching Mini-Latch And Buckle
31