Jeep Compass, Руководство по эксплуатации

Страница: 201 / 310

Pin Number Function Wire Color
Note: The allocation pin 12 has been
changed from “Coding for coupled Trailer” to
“Reserve for Future Allocation.”
a
The three return circuits shall not be con-
nected electrically in the trailer.
b
The rear position registration plate illumi-
nation device shall be connected such that
no light of the device has a common con-
nection with both pins 5 and 7.
Towing Tips
Before setting out on a trip, practice turning,
stopping and backing the trailer in an area away
from heavy traffic.
Manual Transmission – If Equipped
If using a manual transmission vehicle for trailer
towing, all starts must be in first gear to avoid
excessive clutch slippage.
Automatic Transmission — If Equipped
The DRIVE range can be selected when towing.
However, if frequent shifting occurs while in
DRIVE, use the AutoStick® shift control to
manually select a lower gear.
NOTE:
Using a lower gear while operating the ve-
hicle under heavy loading conditions, will
improve performance and extend transmis-
sion life by reducing excessive shifting and
heat buildup. This action will also provide
better engine braking.
If you REGULARLY tow a trailer for more than
45 minutes of continuous operation, then
change the transmission fluid and filter as
specified for
"
police, taxi, fleet, or frequent
trailer towing.
"
Refer to the “Maintenance
Schedule” for the proper maintenance intervals.
AutoStick®
•
When using the AutoStick® shift control, se-
lect the highest gear that allows for adequate
performance and avoids frequent downshifts.
For example, choose
"
4
"
if the desired speed
can be maintained. Choose
"
3
"
or
"
2
"
if
needed to maintain the desired speed.
•
To prevent excess heat generation, avoid
continuous driving at high RPM. Reduce
vehicle speed as necessary to avoid ex-
tended driving at high RPM. Return to a
higher gear or vehicle speed when grade and
road conditions allow.
Electronic Speed Control – If Equipped
•
Do not use in hilly terrain or with heavy loads.
•
When using the speed control, if you experi-
ence speed drops greater than 10 mph
(16 km/h), disengage until you can get back
to cruising speed.
•
Use speed control in flat terrain and with light
loads to maximize fuel efficiency.
Cooling System
To reduce potential for engine and transmission
overheating, take the following actions:
City Driving
When stopped for short periods of time, shift the
transmission into NEUTRAL and increase en-
gine idle speed.
Highway Driving
Reduce speed.
Air Conditioning
Turn off temporarily.
197