JCM Triton Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 36

JCM Triton Скачать руководство пользователя страница 7

7

Important Safety Advice -

(Accessories)

!

Multi Adjustable Head support

Wings on the head support are ideally set at 45 degrees. Do NOT bring the wings in tight

to the head. Ensure that the head support is set in such a way that the child cannot loop

their head around the wings and get stuck.

Flexi-Supports and Lateral Supports

Ensure the straps do not infringe on any feeding tubes the child may have.

Abductors

These parts are designed to abduct the users knees to help keep the hips in a good

position. Do NOT use the abducters as a way of holding the user in the seat. Flip down

the abducter when transferring the user in and out of the seat.

Foot Sandals and Straps

Should only be fixed when the user is wearing shoes or boots.

Tray

Do NOT use the tray as a way of securing children in a chair always ensure that the lap

strap and any other straps supplied are used. Ensure that the tray clips are secure on

both sides of the tray. If the tray is damaged, ensure that this will not be a hazard to the

user. Never leave hot items on the tray while children are unattended.

Operating Brakes (Indoor Base Frames)

Always apply the brakes while the chair is stationary.

!

Applying Brakes

Depress lever (A) with your foot. To
secure the chair in place you should
suppress all the brakes fitted to the
wheels on the base.

Releasing Brakes

To release the brakes you should flick

the levers up using the top of your foot.

When all brakes are released the chair

will be free to travel in any direction.

A

«
...
5
6
7
8
9
...
»

Содержание Triton





































Отзывы:

Нет отзывов