JCM Triton Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 36

JCM Triton Скачать руководство пользователя страница 25

25

Note:

When fitted with Split Leg Stems/Footplates, it is possible to set the angle for both left

and right stems independently. To do this follow the instructions below for each leg stem.

Legrest Adjustment & Removal– Split Option

Angle Adjustment

•

Pull and Hold Out plunger A with

one hand before adjusting the

legrest angle with your other hand

to the desired angle.

•

When you have achieved the

desired position, release the

plunger to secure in the next

available locking position.

•

Ensure the plungers are securely

located in position.

Removing the Leg Stem

(Facilitates Standing Transfer)

Note: Removal of the Footplates

can also help when packaging for

transportation or when the seat is to

be utilised on a chassis with its own

integrated footplates.

•

To Remove the Leg Stems Entirely

(complete with the attached

footplate), remove safety boss B

using the 4mm Allen Key Provided.

•

Once removed, Pull and Hold Out

Plunger A with one hand, using your

other hand to rotate and pull away

the Leg Stem entirely from the main

seating unit.

•

To replace, reverse the operation,

locating the leg stem onto the

fixation Hook C, holding open the

plunger to allow it to engage fully

before releasing the plunger to lock

the leg stem into position.

•

Finally refit the safety boss using the

4mm Allen Key provided.

A

B

«
...
23
24
25
26
27
...
»

Содержание Triton





































Отзывы:

Нет отзывов