6
•
Ensure all adjustment mechanisms are secure and in place before operation. If it is
likely that the hand-wheels will be repeatedly loosened, JCM can supply allen key
bolts as an alternative. We strongly recommend this if there is a danger from those in
the vicinity of the user.
•
After completing any alterations ENSURE all nuts, bolts, knobs, hand wheels and
other fixings are securely tightened and in position, and that they are regularly
checked as part of the maintenance of the chair. Never over adjust or over tighten
moving parts.
•
All postural support straps and harnesses should be in place and properly adjusted to
the user, prior to usage of any kind (see pages 8 & 9).
•
When fitted to an indoor base frame the Triton should always be positioned on a
level, flat floor. The Triton chair can be moved between one working area and another.
For safety ALWAYS return the product to a neutral position and lower before moving
(lower in height, level the seat, ensure the back is upright etc). After the chair has been
moved and during use the chair should be placed in a static position with the brakes
applied. Indoor base frames such as the multi height and tilt base are designed to be
used inside, however it is acceptable to take these bases externally for a brief period if
transferring the chair from one indoor area to another.
•
Heavy items on the tray will affect stability. The fitting of anything other than the
standard JCM tray may substantially affect the stability of the seating system and
should therefore be checked before issue.
•
If at any time it is noted that areas of the users skin remain reddened after being out of
the seating system for around 10 minutes, urgently contact the qualified professional
who performed the hand over of the equipment. This may be a sign of excessive
pressure being exerted by the seating. This might occur in the initial use of a new seat
where further adjustment may be required, where the user has been badly placed,
grown or where an underlying medical problem exists. Review may be necessary in
such cases
•
Keep all products away from excessive sources of heat, cigarettes and naked flames.
•
If you suspect that the system may be faulty, cease use of the equipment straight
away and immediately contact the organization who supplied the system. (JCMs
contact information can be found on the back cover).
•
The equipment will be labelled with important information. NEVER REMOVE these
information labels or allow them to be defaced, overlaid or altered.
•
All modifications, adjustments, reconditioning, repairs, disposal, and servicing of the
seating unit must ONLY be carried out by the agencies who supplied the equipment
(see pages 30-31).
Important Safety Advice
!
We at JCM are committed to producing products of the highest standard. All of
our products fulfil the essential safety and environmental requirements as defined
in the European Directives. However, improper use of the products will potentially
put the users at risk and therefore JCM strongly suggest that the following
information is strictly adhered to at all times.
Throughout the manual there are important points to note identified by the symbol:
!
Содержание Triton
Страница 1: ...1 Triton INSTRUCTION MANUAL...