27
Footplate Angle – As an Alternative you can position the Footplate without
pressing down the handwheel, though this has potential to shorten the
life of the locking mechanism and is therefore not recommended.
Plunger C should pull out freely, if resistance is felt ensure no
weight is being put through the footrest.
!
!
Do not use foot straps unless the client is wearing shoes.
!
•
Slide the Heel guide in or out to narrow/widen the space available for the foot.
•
Repeat for the opposing Heel Guide if require before re-securing the locking screw D
to hold them in place.
Fore & Aft & Rotation.
•
Turn Locking Screws E anti-clockwise half a turn using the 4mm Allen Key provided.
•
Slide the entire foot holder forwards or backs whilst simultaneously setting the rotation
of the plate.
•
Once the desired position has been acquired re-secure the locking screws to hold
back in place.
Side to Side/Width Adjustment
•
Pull and hold open Plunger F,
whilst maintaining hold of the
footplate with your other hand.
•
Once disengaged, the footplate
holder should be free to slide
sideways, bringing the feet
together/apart as required.
•
When you have achieved the
desired position, you should
release the Plunger to engage
it within the closest available
location hole.
•
Ensure the plunger is fully
engaged before commencing
use of the chair.
Foot Straps
Foot straps or ankle huggers can be attached through the slots in the sandal to secure
feet. Feed the strap through the buckle and close the buckle shut to secure.
F
Содержание Triton
Страница 1: ...1 Triton INSTRUCTION MANUAL...