26
C
Foot Positioning Adjustment
D
A
B
C
E
Fooplate Angle Adjustment
•
To set the angle of the footplate you
should loosen the securing handwheel
A by rotating a couple of turns in an
anti-clockwise motion.
•
Once released the Footplate can
be positioned by pressing down on
the handwheel whilst simultaneously
altering the angle using your other
hand.
Once the desired position has been
achieved you should release the
handwheel and re secure it by turning in a
clockwise direction until hand tight.
Flipping Up the Footplate
(Facilitates Standing Transfer)
•
Press in Button B with one hand, using
your other hand to flip up the footplate.
•
To flip back down, simply rotate the
footplate down until it latches back into
place.
Footplate Height
•
Pull and hold open Plunger C, whilst
maintaining hold of the footplate with
your other hand.
•
Once disengaged, the footplate stem
should be free to slide up and down the
legrest stem.
•
Slide to the desired position before
releasing the Plunger to engage it
within the closest available location
hole.
•
Ensure the plunger is fully engaged
before commencing use of the chair.
Foot Holder Positioning
Note: The Foot Holder/Plate can be
adjusted for Foot Size, Fore & Aft, Side to
Side (width between feet) and Foot Angle
(in conjunction with Ab/Adduction) Each
of these adjustments is covered below.
Foot Size
•
Turn locking screws D anti-clockwise
half a turn using the 4mm Allen Key
provided
Содержание Triton
Страница 1: ...1 Triton INSTRUCTION MANUAL...