
16
A
B
•
At the lower back of the chair
squeeze together levers (A), this
releases them from their holding
position in holes (B).
•
Whilst holding the levers together,
hold the chair by the top of the
back and guide the angle of the
back into the required position.
•
Relocate the levers into the
relevant positioning holes (B) to
secure the back in place.
•
Always ensure that the back is
secure and that the levers are
located fully in a hole before
using the chair.
•
Remove the back pad cushion
which is held in place by press
studs.
•
Loosen the two allen key bolts
(A) on the plastic back panel.
•
Slide the plastic panel up or
down to the desired height.
•
Tighten the two allen key bolts
securely.
•
Replace the back cushion pad.
A
Back Height Adjustment
Back Angle Adjustment
Содержание Triton
Страница 1: ...1 Triton INSTRUCTION MANUAL...