
28
Setting the Strength of Resistance & Power of Return
For maximum performance and comfort, it is necessary to adjust the
strength of resistance and power of return of the dynamic mechanism.
The resistance is adjusted by varying the air pressure and should be
determined by the user’s weight, seating position, seat design and
personal preference.
The air pressure is adjusted with a standard schrader valve shock
system pump (A) on the main air valve of the dynamic mechanism.
Strong Resistance -
Increasing the Air Pressure
The shock system is more difficult to compress
during use. The seat back feels firmer when
pushed against.
•
Attach the pump to the air
valve on the back of the
dynamic mechanism (B).
•
Pump air into the valve to
increase pressure.
•
Watch the pressure valve dial
on the pump to determine the
amount of pressure added.
Weak Resistance -
Decreasing the Air Pressure
Makes the shock system compress more easily.
The seat back feels softer when pushed against.
•
Press button (C) on the pump and keep
depressed until the air pressure resistance
achieves required level.
B
A
C
Setting Up the Dynamic Back Mechanism
Never modify your shock system. Modification, improper service or use of non-SR
SUNTOUR spare parts voids the warranty and could cause a malfunction resulting
in serious injury.
Follow the maintenance schedule, if the shock system shows any malfunctions such as
losing oil, making unusual sounds or any part is bent or broken, cease use of the seating
system immediately and contact JCM for assistance.
Never try to open or disassemble the shock system. Opening the shock system could
cause serious injury.
!
The pressure range is 50-250psi. Never exceed an air pressure of 250psi in
the uncompressed shock system. Exceeding the maximum air pressure of
250lbs/inch could result in serious injury.
!
Содержание Triton
Страница 1: ...1 Triton INSTRUCTION MANUAL...