JCM GAMMA VERSUS Series, Руководство пользователя

Страница: 49 / 111

GAMMA VERSUS MANUAL
49
COD. 1257066 Gamma VERSUS Manual v1.13
7.15 Security edge autotest function
Model
All
Associated
parameters
ID Description Type
P5E...P77 IN XX INPUT
P78...P7C OUT XX OUTPUT
P54...P5C Switch X SWITCH
P48 Autotest max attempt NUMERIC
Associated errors
ID Description Type
Er12 Test edge closing error Error
Er13 Test edge opening error Error
Description The security edge autotest function allows automatically test the 8K2 wired security
edges that allow autotest (i.e. Radioband external receiver with 8K2 output). The
autotest is performed before every opening and closing maneuvers to ensure that they
are correctly working.
Configuration
System set-up: In order to use security contact autotest function on VERSUS control
panels the wired security edge must be supplied by control panel voltage output.
Depending on the control panel model this output can be 12Vdc or configurable
12/24Vdc. Regarding the wired security edge output it must be connected to a control
panel.
Parameters: The output that supplies the security edge must be configured as a
“Autotest signal” if the security wired edge is used for closing or opening maneuvers.
This configuration can be done by means of
P78 to P7C configuration parameters by
using a VERSUS-PROG programming tool. In case of security wired edge signal input it
must be configured as “S.EDGE.CL autotest” in case of closing maneuver or
“S.EDGE.OP autotest” in case of opening maneuvers. This configuration can be done
by means of
P5E to P77 configuration parameters.