CAPTIVE SYSTEM
jcm
technologies
27
7.3.
CHECK function
Ideal to know the radio coverage on the installation
Press the receiver’s CHECK button for at
least 1 second to enter check mode. The
indicator light will come on and four beeps
will be heard.
Perform a complete door opening and
closing manoeuvre. During the system
check a beep will be heard every 1,5
seconds. If no other acoustic signal is
heard on completing the manoeuvre, the
system is operating correctly. If the
communication with a transmitter fails during checking, or the communication is deficient, the receiver emits
three consecutive beeps, indicating that an error has occurred.
Press the installed safety edges to detect which one has failed.
Low coverage signal will increase battery consumption.
For exiting CHECK mode, press CHECK button or wait for 5 minutes. On exiting check mode, seven consecutive beeps
will be heard and the indicator light will flash continuously in case of failure.
This function has to be used to check the operation and range of all the devices once the installation has been carried
out.
