SBM-600MW
SBM-600MB
User Manual
·
·
·
·
·
·
·
·
Installations
SBM-600MW
SBM-600MB
·
IR Camera × 1
·
User Manual × 1
Step 1. Open the packet and select the location where you would like to install the dome camera. Take the mounting bracket off the dome camera.
Step 2. Slightly drill the supplied three screws into the three round holes on the mounting bracket and rotate the bracket clockwise until the screws are wedged into the
narrower chase (as shown in Figure 1). Tighten the fixing screws to secure the mounting bracket to the ceiling.
Step 3. Drill a hole in the middle circle and let the power and video line go through (as shown in Figure 2).
Step 4. Mount the dome body onto the mounting bracket and rotate it until it clicks to secure (as shown in Figure 3). Adjust the camera to the correct position and test the
dome camera to make sure it is working properly.
Features
Specifications
MODEL
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm
Package Contents
Figure 1
Figure 2
Figure 3
C
C
A
A
U
U
T
T
I
I
O
O
N
N
R
R
I
I
S
S
K
K
O
O
F
F
E
E
L
L
E
E
C
C
T
T
R
R
I
I
C
C
S
S
H
H
O
O
C
C
K
K
Please use the connector of the camera to a DC 12V regulated power supply.
The tolerance of this unit is DC 12V ± 10 %
Over the maximum DC 12V power input will damage the video output connector (VIDEO OUT)
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of such damages.
Caution:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly “lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol.
Do not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to
revise or remove any content in this manual at any time.
Note
600 TVL Color CCD IR Dome Camera with 24 IR LEDs
1/3" High Resolution Color CCD
More Than 600 TV Lines of Horizontal Resolution
Minimum illumination of 0.1 Lux
Day and Night Features for 24-Hours Surveillance
24 IR LEDs
IR LED Effective Range Reaches Up to 20 Meters
Small and Exquisite
High Reliability Under Long Time Operation
Video Standard
Image Sensor
Effective Picture Elements
Horizontal Resolution
Minimum illumination (approx.)
IR LED
IR LED Effective Range
Video S/N Ratio
Electronic Shutter
Lens
Viewing Angle
Iris Mode
White Balance
Video Output Level
Power Source (±10%)
Current Consumption (±10%)
Dimensions (mm)
Case Color
NTSC / PAL
1/3" High Resolution Color CCD
768 (H) × 494 (V) (NTSC) 752 (H) × 582 (V) (PAL)
600 TVL
0.1 Lux
24 Units
Up to 20 Meters
More than 50dB (AGC Off)
1/60 - 1/60,000 sec (NTSC) 1/50 - 1/60,000 sec (PAL)
f3.6mm / F2.0
92.6°
Automatic Electronic Shutter
Automatic
1.0 Vp-p 75 ohms，Composite
DC 12V
120mA / 1.2W (Max.)
94 ( ) × 71 (H)
White Black
