CAPTIVE SYSTEM
jcm
technologies
36
12.
EC Declaration of conformity
See website:
www.jcm-tech.com/en/declarations
JCM TECHNOLOGIES, S.A. hereby declares that the products CAP ACTIVE, CAP T868/916, CAP R868/916 and CAP
MAGIN complies with the relevant fundamental requirements of the RED Directive 2014/53/EU, as well as with the
Machine Directive 2006/42/EC whenever its usage is foreseen; and with the 2011/65/EU RoHS Directive.
In order to comply with the EN 12978:2003 product standard and assure the correct operation of the system, it is
mandatory to follow the instructions below, to avoid serious dangerous to persons.
· SW1:1 is allowed to be set at ON, only if the door cycle is between 7s and 30s.
· SW1:1 is allowed to be set at OFF, only if the door cycle is greater than 30s.
Note: If the door cycle is smaller than 7s, the system must be used only in WORK mode.
The system complies with EN ISO 13849-1:2008, category 2, PLd.
See website www.jcm-tech.com/en/declarations
JCM TECHNOLOGIES, SA · BISBE MORGADES, 46 BAIXOS - 08500 VIC (BARCELONA) SPAIN
UM_3200914_CAP868_916N SYSTEM_EN_Rev02
