JCM GLOBAL UBA Pro RT Series, Руководство по эксплуатации и обслуживанию

Страница: 76 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 1 2
Section 4 UBA Pro RT/RQ™ Series Banknote Recycler Disassembly/Reassembly
Front Transport Unit Removal
To remove the Front Transport Unit out of the RQ
Frame Unit, proceed as follows:
1. Remove the two (2) E-rings (Figure 4-56 a
1
&
a
2
), the two (2) Gears (Figure 4-56 b
1
& b
2
) and
the two (2) Bearings (Figure 4-56 c
1
& c
2
).
2. Remove the four (4) Screws (Figure 4-57 a
1
through a
4
).
3. Feed the Harness (Figure 4-58 a ) out through the
hole (Figure 4-58 b ) to remove the Side Frame
Assy. (Figure 4-58 c ).
4. Remove the BV Tray Assy. (Figure 4-59 a ).
5. Feed the Harness (Figure 4-59 b ) out through the
hole (Figure 4-59 c ) to remove the Front Trans-
port Unit (Figure 4-59 d ).
6. Remove the Rotary Guide (Figure 4-59 e ).
Figure 4-56 Front
Figure 4-56 Front Transport Unit Removal
(RQ Frame Unit) 1
a
1
b
1
c
1
a
2
b
2
c
2
Figure 4-57 Front Transport Unit Removal (RQ
Figure 4-57 Front Transport Unit Removal
(RQ Frame Unit) 2
a
1
a
2
a
4
b
a
3
NOTE: For the reassembly, route the
Harness as illustrated in Figure 4-57 b .
Ensure that the Harness doesn’t get
pinched when opening the Front Transport
Unit.
Figure 4-58 Front Transport Unit Removal (RQ
Figure 4-58 Front Transport Unit Removal
(RQ Frame Unit) 3
a
b
c
Figure 4-59 Front Transport Unit Removal (RQ
Figure 4-59 Front Transport Unit Removal
(RQ Frame Unit) 4
a
d
e
b
f
c
NOTE: For the reassembly, route the
Harness as illustrated in Figure 4-59 f .
Ensure that the Harness doesn’t get
pinched when opening the Front Transport
Unit.