JCM GLOBAL UBA Pro RT Series Скачать руководство пользователя страница 23

Страница: 23 / 196

P/N 960-000213R_Rev.A

1 - 3

General Information

UBA Pro RT/RQ™ Series Banknote Recycler

Section 1

(Type 3)

Do not install the unit in a dusty



environment. Dust may damage the unit or

degrade its performance.

User Cautions

Careful measures are taken in the design of this

product to ensure its quality; however, the follow-

ing cautions should be read and understood by all

users in order to confirm safe operation.

Installation Cautions

The Installation Cautions are defined as follows:

1. Do not allow the Unit to endure or operate at a

high temperature, in high humidity and/or in a

dusty environment. (Refer to “Environmental

Specifications” on page 1-8.)

2. Do not install the Unit into an area where exces-

sive vibration or shock are present.

3. The Unit is not designed for outside installation.

Be sure that the Host Machine contains enough

protection to avoid wet or dusty conditions when

installing in either an indoor or open-air space.

4. Avoid exposing the Unit to direct Sunlight and/or

Incandescent Lamp illumination. (Refer to

“Environmental Specifications” on page 1-8.)

5. Ensure that the Host Machine is designed for

daily operational access for maintenance and/or

clearing a Banknote jam. (Refer to “Unit Dimen-

sions” on page 1-9.)

6. When installing the equipment, connect the

Frame Housing to the Frame Ground of the Host

Machine.

7. If an unused Interface Harness exists, cut the

Harness off short to avoid attracting static elec-

tricity or a short circuit possibility that may cause

damage to the Unit.

8. Because this equipment is a component product,

close the Host Machine’s door before using it.

9. Do not operate the

RT/RQ Unit without the Cash

Box and/or the Recycler or while the Cash Box

and/or the Recycler’s door is open. Do not use

the Unit where it may be exposed to airborne

evaporated or sporadic chemicals and/or oil.

10. Do not use the Unit where it may be exposed to

airborne evaporated or sporadic chemicals and/or

oil.

11. Ensure that the Host Machine is designed consid-

ering the risk of electronic components that can

cause induced noise. The noise generated by the

components on the Host Machine may affect and

degrade the Validation performance.

Mounting, Dismounting & Transportation

Methods for Mounting, Dismounting, and Trans-

porting the Unit are as follows:

1. Be sure to remove the Power from the RT/RQ

Unit before attaching or unplugging Connector

Plugs to avoid the risk of damage to the Unit.

2. Be sure to carry the Unit by both hands when

transporting it. Holding the Unit by one hand

may cause personal injury if the Unit accidentally

becomes disassembled and falls away from the

Frame housing.

3. Be careful not to use excessive outside pressure

on the Recycler, or subject it to excessive vibra-

tion during transportation.

4. Check that the UBA Pro Unit does not drop off

the Unit Frame while pulling the Recycler for-

ward from the Frame.

Operation Cautions

The Operation Cautions are defined as follows:

1. When closing the UBA Pro Unit, ensure it firmly

clicks into place.

2. When installing the Recycler, ensure it firmly

clicks into place.

3. Do not remove the Recycler and/or the Cash Box

during operation.

4. Do not throw or apply strong external pressure on

the Recycler.

5. Be sure to follow the specified measures when

removing or re-seating any removal unit of the

RT/RQ Unit. Improper handling may cause per-

sonal injury and/or damage to the equipment.

6. The Recycler is not protected by a key. Caution is

advised for cash handling.

Preventive Maintenance

The Preventive Maintenance requirements are

defined as follows:

1. Be sure to remove the Power from the RT/RQ

Unit before cleaning or a cleaning or mainte-

nance procedure, except for the Recycler and the

Cash Box. Cleaning or performing maintenance

while the Power is turned on may cause personal

injury if the Unit mechanisms accidentally move.

2. To keep the RT/RQ Unit’s performance optimal,

clean and maintain the RT/RQ Unit regularly

based on the Unit condition and/or maintenance

schedule. (Refer to “Cleaning Procedure” on

page 2-15.)

3. Do not redesign or disassemble the Recycler.

Unauthorized use by inadequately-trained



personnel, or use outside the original manufac-

turer’s intent for operation voids the warranty.

4. Perform cleaning and maintenance regularly

when using the equipment in an smoky environ-

ment such as where excessive Automobile

exhaust emission or Cigarette Smoke may exist.

WARNING: Make sure Interface Harness

connections to the Host Machine are

shorter than 9.84 Feet (3 Meters) in

length. Cut off all unused portions of

the Interface Harness wiring to avoid

static electrical effects or short circuit

possibilities that could cause damage

to the Unit.

WARNING: Do not inject water or liquid
agents of any kind into the Unit, as this
may cause extreme damage to the Unit.

Содержание UBA Pro RT Series





































































































































































































Результаты поиска

Содержание UBA Pro RT Series

Отзывы:

Похожие инструкции для UBA Pro RT Series

Бренды по названию

Популярные бренды

JCM GLOBAL UBA Pro RT Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание UBA Pro RT Series

Отзывы:

Похожие инструкции для UBA Pro RT Series

Бренды по названию

Популярные бренды