JCG AC860 1900M DUAL BAND GIGABIT ROUTER
50
/
78
➢
Comment:
Using alphanumeric characters to distinguish this static route.
3.
Click
Add
.
4.
The
Routing Table
will be updated to show the new static route.
5.
Select the static route and click
“Delete”
if you no longer want to keep this path.
IPv6
1.
Select
IPv6
for
IP Protocol Type.
2.
Under
Static Routing Settings
, enter correct values in the corresponding fields.
▪
IPv6 Dest. IP Address/Subnet Prefix Length:
Enter the IPv6 address and subnet
prefix length provided by your ISP (typically 64).
▪
Gateway:
Enter IP address of the gateway.
▪
Interface:
Specify whether the Destination IP Address is either on the LAN or the
WAN.
(Note: If you choose LAN, the static IP address you are setting goes to the
LAN or local network of the router. If you choose WAN, the static IP address will
be routed to the WAN part of the router. However, most IP addresses coming out
of the WAN depends on the configuration set by your Internet Service Provider
(ISP).)
▪
Comment:
Using alphanumeric characters to distinguish this static route.
