jcb G20 Скачать руководство пользователя

Страница: 8 / 177

Introduction

About this Manual

9831/0650-3

Introduction

About this Manual

Model and Serial Number

This manual provides information for the following model(s) in the JCB machine range:

Model

From:

To:

G20

2288985

2298985

G20QS

2288985

2298985

G20S

2288985

2298985

G27

2288985

2298985

G27QS

2288985

2298985

G27S

2288985

2298985

G33

2288985

2298985

G33QS

2288985

2298985

G33S

2288985

2298985

G34QS

2288985

2298985

G40

2288985

2298985

G40QS

2288985

2298985

G40S

2288985

2298985

G41QS

2288985

2298985

G45

2288985

2298985

G45QS

2288985

2298985

G45S

2288985

2298985

Using the Manual

This operator's manual is arranged to give you a good understanding of the machine and its safe operation.

It also contains maintenance and technical data.

Read this manual from the front to the back before you use the machine for the first time, even if you have used

machines of a similar/same type before as the technical specification, systems and controls of the machine

may have changed. Particular attention must be given to all the safety aspects of operating and maintaining

the machine.

If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could

be killed or seriously injured.

The general and specific warnings in this section are repeated throughout the manual. Read all the safety

statements regularly, so you do not forget them. Remember that the best operators are the safest operators.

The illustrations in this manual are for guidance only. Where the machines are different, the text and or the

illustration will specify.

The manufacturer's policy is one of continuous improvement. The right to change the specification of the

machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur

between specifications of the machine and the descriptions contained in this manual.

All of the optional equipment included in this manual may not be available in all territories

Left-Hand Side, Right-Hand Side

References to the left side and right side of the engine are when view from the flywheel end of the engine.

Содержание G20


















































































































































































Результаты поиска

Содержание G20

Отзывы:

Похожие инструкции для G20

Бренды по названию

Популярные бренды

jcb G20, Руководство оператора

Результаты поиска

Содержание G20

Отзывы:

Похожие инструкции для G20

Бренды по названию

Популярные бренды