manualshive.com logo in svg

jcb G20, Руководство оператора

Поделиться
Скачать
jcb G20 Скачать руководство пользователя страница 41

 Operation

 Instruments

34

9831/0650-3

34

Mode Icon

An icon is displayed in the Mode Icon section to indicate the mode the controller is currently in.

Table 7.

Icons

Description

Appears when the engine is at rest and the unit is in

stop mode.

Appears when the engine is at rest and the unit is in

auto mode.
Appears when the engine is at rest and the unit is

waiting for a manual start.

Appears when a timer is active, for example cranking

time, crank rest etc.

Appears when the engine is running, and all timers

have expired, either on or off load. The animation

speed is reduced when running in idle mode.

Appears when the unit is in the front panel editor.

Appears when a USB (Universal Serial Bus) connec-

tion is made to the controller.

Appears if either the configuration file or engine file

becomes corrupted.

Load Switching Icon

Additional features for optional DSE4520 mains failure controller.

Icons are displayed in the Load Switching Icon section to indicate the current operation status of the controller.

Table 8.

Icons

Description

Appears when the generator is at rest or not available and when the generator

breaker is open.

Appears when the generator is at rest or not available and the generator breaker

has failed to open.

Appears when the generator is available and the generator breaker is open.

Appears when the generator is available and the generator breaker is closed.

Appears when the mains supply is not available and the mains breaker is open.

Appears when the mains supply is not available and the mains breaker is closed.

Содержание G20


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды