JBL CINEMA VISION CVPD50 Скачать руководство пользователя страница 33

Страница: 33 / 116

IMPORTANT NOTE:

The JBL Cinema

Vision remotes are powerful devices
capable of controlling virtually your entire
home cinema system. In comparison to a
traditional system of the same capabili-
ties, these remotes can replace up to 10
separate remote controls and therefore
end the confusion and clutter associated
with having a different remote for each
of your system components. In order to
achieve this goal, the JBL Cinema Vision
remotes are designed to assume the
duties of controlling different devices
within your system by first pressing one
of the 10

Selector Buttons

dfg

. Pressing one of these

buttons places your remote control in a
different “page”, where the remote but-
tons are assigned control functions avail-
able for that specific purpose. For exam-
ple, all internal DVD changer functions
are accessed by pressing the

DVD

Button

first, and all CVPD50

Plasma Display functions are accessed
by pressing the

Screen Button

first, and all overall audio and system
commands for the CVR700 are accessed
by first pressing the

System Button

. Throughout this manual, you

will see references to the system being
active in DVD, SYSTEM, SCREEN, CABLE/
SAT, or other modes. This means that one
of these 10 keys is to be pressed first to
place your remote in the prescribed mode
before accessing any specific controls. It
is important to always remember to press
the appropriate page selection key before
trying to access any specific functions for
a system or source. This may take a little
bit of discipline and practice at first, but
it should become second nature in a very
short time.

Each function on the CVR700R1 remote
has the same effect on the CVR700,
CVPD50 and other devices as described
earlier for the CVR700R2 remote control
functions; however, functions may be
combined on different keys. Each key has
an independent function depending on
the device currently in use. Be careful to
press the input selector, or the System or
Screen mode selector, corresponding to
the device you wish to control prior to
pressing a button to be sure that your
button press will operate the desired
function. Refer to the function list on
pages 96 through 97 for information on
which function is assigned to a given key
for a given device.

Power On (All):

Press this button

to power on the CVR700, the CVPD50 or

another device you selected by first
pressing the appropriate

Input Selector

Press and hold this button to place all
devices, including the CVR700, the
CVPD50 and any other products whose
codes you have programmed into the
remote, into the Standby mode.

DVD/Tuner/Auxiliary/VCR/CBL/

SAT Input Selectors:

Pressing one of

these buttons will perform two actions.
First, the CVR700 will switch to the
source selected. Then, the remote will
switch to the control codes for the selected
source. In order to control the CVR700
again, press the

System Selector

and to control the CVPD50 screen, press
the

Screen Selector

Press and hold any of these buttons to
power on the CVR700, the CVPD50 and
the source device, and to begin play of
the source device.

Sports, Broadcast and Movies

Preset Selectors:

When the

Screen

Selector

is active, press any of

these buttons to select the CVPD50 pic-
ture settings that were preset at the fac-
tory for optimum viewing of sporting
events, broadcast television programs or
movies.

NOTE:

The

Sports/Broadcast/ Movies

Buttons

optimize picture

settings for a specific viewing medium.
The Broadcast settings are the most neu-
tral, balanced and accurate, and are opti-
mized for clarity. The Movies settings are
softer and less bright. The Sports settings
are more vibrant and optimized for fast-
moving action.

⁄

Navigation Buttons:

These

buttons are used to navigate the on-
screen configuration menus, to scroll
through options lists and to select various
settings such as delay, speaker configura-
tions, surround modes, digital inputs, etc.

Level/DVD Setup/Guide Button:

This button is used to start the process of
setting the CVR700’s output levels to an
external source, such as a favorite DVD.
While the source is playing, press this
button, and then press the

⁄

Navigation Controls

until the

channel to adjust appears. Press the

Set Button

to select that channel,

and then use the

⁄

Navigation

Controls

again to adjust the

level setting. See page 64 for more
information.

In DVD mode, this button accesses the
DVD setup menu described on page 53,
and enables you to configure the DVD
changer.

‹

›

Navigation Buttons:

These

Set Button:

This button is used to

enter settings into the CVR700’s memory,
or to confirm a selection while setting
delay times, speaker configuration and
output level adjustments. It is used as
the Enter or OK button for most other
devices.

Exit/Cancel Button:

When pro-

gramming the remote, press this button
to cancel the current function and return
to the previous remote function. When
using the remote to enter frequencies for
direct tuner access or track numbers for
direct access on a CD, press this button
to clear previous entries.

Direct/Brightness/Window

Button:

Press this button when the

tuner is in use to directly enter a station’s
frequency, or when a CD is in use to
directly enter a track number. After press-
ing this button, press the appropriate

Alphanumeric Keys

to select a

station or track.

When the Screen mode is active, press
this button to adjust the brightness of the
CVPD50. See page 55 for more informa-
tion on screen adjustments. This button
also activates the Window function for
TiVo players. See your TiVo owner’s man-
ual for more information on the Window
function.

NOTE:

The

Sports/Broadcast/ Movies

Buttons

optimize picture

Game/Digital Recorder/

Computer Input Selectors:

Pressing

one of these buttons will perform two
actions. First, the CVR700 will switch to
the source selected. Then, the remote
will switch to the control codes for the
selected source. In order to control
the CVR700 again, press the

System

Selector

, and to control the