JBL CINEMA VISION CVPD50 Скачать руководство пользователя страница 64

Страница: 64 / 116

VCR Analog Audio/Video Outputs

. However, the digital signals will be

passed through to the

Digital Audio

Outputs

¶bg

Tuner Operation

The CVR700’s tuner is capable of tuning
AM, FM and FM Stereo broadcast sta-
tions. Stations may be tuned manually,
or they may be stored as favorite station
presets and recalled from a 30-position
memory.

Station Selection

1. Press the

Tuner Button

the remote to select the tuner as an
input. The tuner may be selected from
the front panel by turning the

Source

Selector

until the tuner is active.

2. Press the

Tuner Button

Tuner Band Selector

to switch

between AM and FM so that the
desired frequency band is selected.

3. When using the front-panel controls,

the

Tuning Mode Button

used to select the function of the

Tuning/Preset Up/Down Buttons

. Press the

Tuning Mode Button

to toggle between

TUNING

and

PRESET

. Press the

Tuning Mode

Selector

on the remotes to

select manual or automatic tuning.

In either mode, each press of the

Tuning Selectors

will increase or decrease the fre-

quency by one increment. When the

Tuning Mode Selector

has

been pressed so that

AUTO TUNE

appears in the

Lower Display Line

, pressing and holding the

Tuning

Selectors

will

cause the tuner to scan for the next
higher or lower frequency with an
acceptable signal. Release the button,
and

AUTO TUNED

will appear in

the

Lower Display Line

to indi-

cate that a station has been tuned.

AUTO ST TUNED

will appear in

the

Lower Display Line

for FM

stereo stations.

When the

Tuning Mode Selector

has been pressed so that

MANUAL TUNE

appears in the

Lower Display Line

, pressing

and holding the

Tuning Selectors

will cause the

tuner to scan up or down through
all frequencies, stopping when you
release the button, even if no accept-
able signal is present. The message

MANUAL TUNED

will neverthe-

less appear in the

Lower Display

Line

4. Stations may also be tuned directly in

either the automatic or manual mode.
To enter a station’s frequency directly,
first select the AM or FM band as
desired be pressing the

Tuner Button

. Next, press the

Direct

Button

. Within 5 seconds of

when

DIRECT IN

scrolls in the

Lower Display Line

, enter the

station frequency by pressing the

Numeric Keys

. If you press

an incorrect button while entering a
direct frequency, press the

Exit/

Cancel Button

to start over.

Preset Tuning

Using the remote, up to 30 stations may
be stored in the CVR700’s memory for
easy recall using the front-panel controls
or the remote.

To enter a station into the memory, first
tune the station using the steps outlined
above. Then:

1. Press the

Memory Button

; two underlines will flash in the

Upper Display Line

2. Within 5 seconds, press the

Numeric

Keys

corresponding to the

memory location where you wish to
store this station’s frequency. The pre-
set number will appear in the

Upper

Display Line

3. Press the

Memory Button

again to store the preset station.

4. Repeat the process after tuning any

additional stations to be preset.

NOTE:

By its nature, plasma display

devices tend to interfere with AM radio
reception. In any event, as mentioned
elsewhere in this manual, it is preferable
to leave the screen off to avoid burn-in
when no video signal is present and the
startup screen may be displayed for a
long time. Therefore, when the AM tuner
band is selected as the source, the CVPD50
will automatically enter the standby mode.
To wake it, simply select any other source
(including the FM tuner band).

Recalling Preset Stations

• To manually select a station previously

entered in the preset memory, press
the

Numeric Keys

for the

desired station’s memory location.

• To manually scroll through the list of

preset stations, press the

Preset

Stations Selector Button

on the front panel or remote.

When using the front-panel controls,
remember to first press the

Tuning

Mode Selector

to select Preset

as the function of the

Tuning/Preset

Buttons

Recording

In normal operation, the audio or video
source selected for listening through the
CVR700 is sent to the record outputs.
This means that any program you are
watching or listening to may be recorded
simply by placing machines connected
to the

Digital Recorder Analog Audio/

Video Outputs

‚

VCR Analog

Audio/Video Outputs

in the

record mode.

When a digital audio recorder is connected
to the

Digital Audio Outputs

you are able to record the digital signal
using a CD-R, MiniDisc or other digital
recording system.

NOTES:

• The digital outputs are active only

when a digital signal is present, and
they do not convert an analog input to
a digital signal, or change the format
of the digital signal. In addition, the
digital recorder must be compatible
with the output signal. For example,
the PCM digital input from a CD

player may be recorded on a CD-R

or MiniDisc, but Dolby Digital or
DTS signals may not.

• Please obey the copyright restrictions

on any material you copy. Unauthorized
duplication of copyrighted materials is
prohibited by law.

Output Level Trim Adjustment

Normal output level adjustment for the
CVR700 is established using the test tone,
as outlined on pages 50–52. In some
cases, however, it may be desirable to
adjust the output levels using program
material such as a test disc, or a selection
you are familiar with. Additionally, the
output level for the subwoofer can only
be adjusted using this procedure.

To adjust the output levels using program
material, first set the reference volume for
the front left and front right channels
using the

Volume Control

Óu

If you are using a disc with test signals
or an external signal generator as the
source used when the output levels are
being trimmed, you may use the remote