JBL CINEMA VISION CVPD50 Скачать руководство пользователя страница 48

Страница: 48 / 116

reset that source to the factory default
settings.

Speaker Configuration

It is important to make sure that the
CVR700 is correctly configured for your
speakers so that low frequency portions
of the audio program will be steered to
the appropriate loudspeakers (this is
called bass management). Speaker con-
figuration also ensures that there are no
time delay artifacts caused by the speak-
ers being placed at varying distances
from the listening position. And it is in
this section that the output levels are
adjusted to ensure that all speaker chan-
nels are balanced, preserving the direc-
tionality and dynamism of the original
recording.

If you are using JBL Cinema Vision loud-
speakers, you will be able to skip some
of these settings, as the CVR700 has
been preprogrammed at the factory to
accommodate your speakers. However,
you will need to program the distances
and speaker output levels to conform to
your specific listening room.

With the

MAIN MENU

(Figure 6) on

screen, scroll to the

SPEAKERS

line

and select it, and the confirmation screen
(Figure 19) will appear, allowing you an
opportunity to retain the previous set-
tings. Note that the

RESET

line indi-

cates that all sources will have their
speaker settings reset if you choose the
reset option. Speaker settings are global,
and only need to be set once, unless you
change the

BASS MGR

line in the

SPEAKER CONFIGURATION

submenu (Fig. 21) to I

NDEPENDENT

Select

YES

to change the speaker set-

tings and continue to the

SPEAKERS

submenu (Figure 20).

Figure 19

Figure 20

Figure 21

Configuring Speaker Sizes

The first step is to configure speaker sizes.
You may skip this step if you are using JBL
Cinema Vision speakers at all positions. If
you are using other model or brand loud-
speakers, you should NOT skip this menu.
Scroll to the

CONFIGURATION

line

and select it to display the

SPEAKER

CONFIGURATION AND BASS
MANAGER

submenu (Figure 21). For

each of these settings, use the

LARGE

setting if the speakers for a particular
position are traditional full-range loud-
speakers. Use the

SMALL

setting for

smaller, frequency-limited satellite speak-
ers that do not reproduce sounds below
200Hz. Note that when “small” speakers
are used, a subwoofer is required to
reproduce low-frequency sounds.
Remember that the “large” and “small”
descriptions do not refer to the actual
physical size of the speakers, but to
their ability to reproduce low-frequency
sounds. If you are in doubt as to which
category describes your speakers, consult
the specifications in the speakers’
owner’s manual, or ask your dealer.

The factory default sets all channels
to

SMALL

, except for the

BACK

SURROUNDS

, which are set to

NONE

, as the factory default system

configuration is for a 5.1-channel system.

NOTE:

This setting is not affected by

changing the System Configuration setting
(see Figure 7). In order to benefit from
full 7.1-channel operation, you must
change both the System Configuration
setting and you must enable the Back
Surround speakers in the

SPEAKER

CONFIGURATION AND BASS
MANAGER

submenu (Figure 21).

Begin the speaker setup process by mak-
ing certain that the cursor is pointing at
the

FRONT

line, which sets the config-

uration for the front left and right speak-
ers. If you wish to make a change to the
front speakers’ configuration, press the

‹

›

Navigation Controls

so that either

LARGE

SMALL

appears, matching the appropriate
description from these definitions:

When

SMALL

is selected, low-fre-

quency sounds will be sent only to the
subwoofer output. If you choose this
option and there is no subwoofer con-
nected, you will not hear any low-fre-
quency sounds from the front channels.

When

LARGE

is selected, a full-range

output will be sent to the front left and
front right outputs. Only LFE-channel infor-
mation will be directed to the subwoofer.

When you have completed your selection
for the front channel, press the

⁄

Navigation Controls

to move

the cursor to

CENTER

. Press the

‹

›

Navigation Controls

to select

the option that best describes your sys-
tem, based on these speaker definitions:

When

SMALL

is selected, low-fre-

quency center channel sounds will be
sent only to the subwoofer output. If you
choose this option and there is no sub-
woofer connected, you will not hear low-
frequency sounds from the center channel.

When

LARGE

is selected, a full-range

output will be sent to the center speaker
output, and NO center channel signal will
be sent to the subwoofer output.

NOTE:

If you choose Logic 7 as the sur-

round mode for the particular input
source for which you are configuring
your speakers, the CVR700 will not make
the

LARGE

option available for the

center speaker. This is due to the require-
ments of Logic 7 processing, and does
not indicate a problem with your receiver.

When

NONE

is selected, no signals will

be sent to the center channel output. The
receiver will operate in a “phantom” cen-
ter channel mode and center channel
information will be sent to the left and
right front channel outputs.

When you have completed your selection
for the center channel, press the

⁄

Navigation Controls

to move

the cursor to

SIDE SURROUNDS

Press the

‹

›

Navigation Controls

to select the option that best

describes the surround speakers in your
system based on these speaker definitions:

When

SMALL

is selected, low-fre-

quency surround channel sounds will be
sent to the subwoofer output only. If you
choose this option and there is no sub-
woofer connected, you will not hear any
low-frequency sounds from the side sur-
round channels.

When

LARGE

is selected, a full-range

output will be sent to the side surround
channel outputs, and NO surround channel

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

SPEAKER CONFIGURATION
AND BASS MANAGER *
FRONT :SMALL
CENTER:SMALL
SIDE SURROUNDS:SM ALL
BACK SURROUNDS:SM ALL
SUBWOOFER:ON
BASS MGR:GLOBAL
RESET THESE SETTI NGS?

BACK TO SPEAKERS MENU

›

* SPEAKERS *

CONFIGURATION
CROSSOVERS
DISTANCES
LEVELS

BACK TO MAIN MENU

›

** SPEAKERS **

ARE YOU SURE YOU
WANT TO CHANGE
SPEAKER SETTINGS?

NO
YES
RESET ALL SPEAKERS
TO FACTORY SETTINGS?

›

CVR700 OM 12/17/04 4:24 PM Page 48