JBL CINEMA VISION CVPD50 Скачать руководство пользователя страница 65

Страница: 65 / 116

as an SPL meter to guide you to the cor-
rect level settings. To use the EzSet
remote as an SPL meter, follow the
instructions on page 51.

Once the reference level has been set,
press the

Level Button

and

SP LEVEL FL 0

will appear in the

Lower Display Line

with

FL 0

flashing. To change the level, first press
the

Set Button

to select the

front left (FL) channel, and then use the

⁄

Navigation Controls

raise or lower the level. DO NOT use the
volume control, as this will alter the
reference setting.

Once the change has been made, press
the

Set Button

and then press

the

⁄

Navigation Control

to select the next output-channel location
that you wish to adjust. To adjust the
subwoofer level, press the

⁄

Navigation Control

until

SP LEVEL

SUB 0

appears in the

Lower Display Line

Repeat the procedure as needed until all
channels requiring adjustment have been
set. When all adjustments have been
made and no further adjustments are
made for 5 seconds, the CVR700 will
return to normal operation.

The channel output for any input may
also be adjusted using the on-screen
menu system. First, set the volume to
a comfortable listening level using the

Volume Control

Óu

. Then, press

the

OSD Button

to bring up the

MASTER MENU

(Fig. 1). Use the

⁄

Navigation Controls

scroll down to the

SPEAKERS

line,

and press the

Set Button

select it. The confirmation menu (Figure
18) will appear, and you should scroll
down to the

YES

line and select it. This

will cause the

SPEAKERS

(Figure 19) to be displayed. Scroll down
to the

LEVELS

line and select it,

which will bring up the

SPEAKER

LEVELS

submenu (Figure 27).

Once the

SPEAKER LEVELS

submenu appears on your video screen,
use the

⁄

Navigation Controls

to move the on-screen

›

cursor

so that it is next to the

TEST TONE

line. Press the

‹

›

Navigation Controls

so that

OFF

is highlighted.

This will turn off the test tone and allow
you to use your external test disc or other
source material as the reference. Then,
use the

⁄

Navigation Controls

to select the channels to be

adjusted. At each channel position, use
the

‹

›

Navigation Controls

to change the output level. Remember, the
goal is to have the output level at each
channel be equal when heard at the lis-
tening position.

If you wish to reset all the levels to their
original factory default of 0dB offset,
press the

⁄

Navigation Controls

so that the on-screen cursor is

next to the

RESET

line and press the

Set Button

. After the levels are

reset, resume the procedure outlined
above to reset the levels to the desired
settings. When all adjustments are done,
scroll

BACK TO MASTER MENU

and then press the

Set Button

if you wish to go back to the main menu
to make other adjustments. If you have
no other adjustments to make, press the

OSD Button

to exit the menu

system.

NOTE:

Output levels may be separately

trimmed for each surround mode. If you
wish to have different trim levels for a spe-
cific mode, select that mode and then fol-
low the instructions shown above.

Memory Backup

This product is equipped with a memory
backup system that preserves the system
configuration information and tuner pre-
sets if the unit is accidentally unplugged
or subjected to a power outage. This
memory will last virtually indefinitely.