JBL CINEMA VISION CVPD50 Скачать руководство пользователя страница 34

Страница: 34 / 116

CVPD50 screen, press the

Screen

Selector

Press and hold any of these buttons to
power on the CVR700, the CVPD50 and
the source device, and to begin play of
the source device.

Mute Button:

Press this button to

momentarily silence the CVR700. Press
it again, or use the

Volume Up/Down

Control

to restore audio.

Volume Up/Down Control:

To raise

the volume, press towards the top of the
button (marked

⁄

); to lower the volume,

press towards the bottom of the button,
where it is marked

Disc Direct/Favorite Button:

DVD mode, press this button, and then
press the numeric key corresponding to
the position number of the disc you wish
to play to immediately begin playback of
that disc.

When used with cable television boxes or
satellite receivers, pressing this button
scrolls through your list of preprogrammed
favorite channels.

Alphanumeric Keys:

Select num-

bers or letters by pressing these keys,
except in System mode (when operating
the audio section of the CVR700), in
which case each key has the following
functions:

1: Dolby Surround Mode Selector:

This button is used to select from the
available Dolby audio surround modes.
Each press of this button will select one
of the Dolby Pro Logic II (available in
5.1-channel systems) or IIx (available in
6.1/7.1-channel systems) modes, Dolby 3
Stereo, or Dolby Digital when a Dolby
Digital-encoded source is in use. Each
press of this button will scroll through the
available modes. See page 62 for more
information on Dolby modes.

2: DTS Digital Surround Mode
Selector:

When a DTS-encoded digital

source is playing, each press of this but-
ton will scroll through the available DTS
audio surround modes. The specific
choice of modes will vary according to the
type of encoding on the disc and your sys-
tem’s speaker configuration (5.1-channel
or 6.1/7.1-channel). When a DTS source is
not in use, this button has no function in
System mode. See page 62 for more
information on DTS modes.

3: DTS Neo:6 Surround Mode
Selector:

This button is used to select

a DTS Neo:6 audio surround mode. See
page 62 for more information on the
available DTS Neo:6 options.

4: Logic 7 Surround Mode Selector:

Press this button to select from among
the available Logic 7 surround modes.
(See page 62 for descriptions of the vari-
ous surround modes.)

5: DSP Surround Mode Selector:

Press

this button to select one of the DSP audio
surround modes, such as Hall 1, Hall 2 or
Theater. Each press of the button selects
another mode. See page 62 for descrip-
tions of surround modes.

6: Stereo Mode Selector:

This button is

used to select a stereo listening mode.
When the button is pressed so that

SURROUND OFF

appears in the

Lower Display Line

, the CVR700

will operate in a bypass mode with true,
fully analog, two-channel left/right stereo
mode with no surround processing or
bass management, as opposed to other
modes where digital processing is used.
When the button is pressed so that

SURROUND OFF

appears in the

Lower Display Line

, and the DSP

and

Surround Off Surround Mode

Indicators

are lit, you will enjoy a

two-channel presentation of the sound
along with the benefits of bass manage-
ment. Depending on whether your system
is configured for 5.1 orf 6.1/7.1 channels,
the next press of the button will cause
either

5 CH STEREO

7 CH

STEREO

to appear, and the stereo

signal will be routed to all five (or seven)
speakers. See page 62 for more informa-
tion on stereo playback modes.

7: Test Tone:

Press this button to activate

the CVR700’s test tone that is used to cal-
ibrate speaker output levels. See pages
50 through 52 for more information on
calibrating speaker output levels. (The
EzSet function is not available on the
secondary remote.)

8: No Additional Function

9: Night Mode:

This button activates the

Night mode, which preserves dialogue
(center-channel) intelligibility at low vol-
ume levels when available in specially
encoded Dolby Digital sources.

0: Sleep Timer:

The Sleep function is

activated to automatically place the
CVR700 and CVPD50 in Standby mode
after a period of time. Each press of the
button changes the time until turn-off: 90
minutes, 80 minutes, 70 minutes, 60 min-
utes, 50 minutes, 40 minutes, 30 minutes,
20 minutes, 10 minutes, Sleep mode Off,
and then cycling back to 90 minutes, and
so forth. When the Sleep timer is in use,
the front-panel displays will dim to half
brightness.

Angle/Tuning Mode (Tune-

Manual) Button:

When the DVD mode

is active, press this button to select an
alternate camera angle if available on
the current DVD.

When the tuner is in use, press this but-
ton to change the tuner mode between
manual and automatic. When the button
is pressed so that

TUNE AUTO

appears in the

Lower Display Line

only stations with acceptable signal quality
will be tuned when scanning, and the
tuner will play FM stations in stereo,
when available. In the Auto mode, when
the

Tuning Up/Down Buttons

are pressed, the unit will

automatically search for the next avail-
able station with good signal strength.
When this button is pressed so that

TUNE MANUAL

appears in the

Lower Display Line

, pressing and

holding the

Tuning Up/Down Buttons

will cause the tuner

to scan up or down and stop when you
release the button, even if there is no
acceptable signal at that frequency. In
either Auto or Manual mode, each tap of
the

Tuning Up/Down Buttons

will move the frequency up

or down in single-step increments. When
the FM band is in use, pressing the button
so that the Tune Manual mode is activated
will enable you to tune stations with
weak signals by changing to monaural
reception. See page 64 for more informa-
tion on tuner operation.

Letterbox/Screen Saver Button:

This button performs the Letterbox func-
tion, which enables you to adjust the
screen to eliminate black bars that may
appear on the top and bottom or sides of
the image due to the aspect ratio of the
program material differing from the 16:9
aspect ratio of the CVPD50. In most
cases, the CVR700’s video processor is
able to automatically detect the aspect
ratio setting of the program material and
adjust the display automatically to fill the
screen. However, in some cases the mate-
rial may be a movie displayed in wide-
screen format, or the material may not
contain embedded information necessary
for the CVR700 to make an automatic
adjustment. The available letterbox
modes are:

16:9 – This setting is used to display 16:9
program material in the full-screen 16:9
mode on the CVPD50. This setting will
also apply a linear (consistent) stretch to
a 4:3 picture.