13
www.jbl.com
E
ngli
sh
connecTing your coAxiAl digiTAl Audio Source deVice
If one of your non-HDMI source devices has a coaxial digital output,
connect it to the receiver’s Coaxial Digital Input connector. NOTE: Make only
one type of digital connection (HDMI, optical or coaxial) from each device.
To Coaxial Digital
Audio output
Coaxial Digital Audio
Cable (not supplied)
Coaxial-Equipped Source Device
connecTing your AnAlog Audio Source deViceS
Use the receiver’s Aux In connectors for a source device that doesn’t have
an HDMI or digital connector.
To Stereo Analog
Audio output
Stereo Audio Cable
(not supplied)
Analog Source Device
connecTing To your hoMe neTWork
Use a Cat. 5/5E Ethernet cable (not supplied) to connect the BD receiver’s
Network connector directly to your home network router, network switch,
network modem or Ethernet network wall jack that has Internet access.
See
Network,
on page 17, for information about joining the BD receiver with
your home network.
To Internet
To Internet
Network
Modem
Network
Modem
Wireless
Router
Ethernet Cat. 5/5E Cable
(not supplied)
Wireless LAN/USB
Adapter (supplied)
* Insert Wireless LAN/USB adapter
only in rear-panel USB port
*
WIRED NETWoRk
WI-FI
®
NETWoRk (BD300 oNLy)
• Insert the Wireless LAN/USB adapter with its metal contacts facing UP.
• Do not insert the supplied Wireless LAN/USB Adapter into the receiver’s
front-panel USB port. It will work only when inserted into the rear-panel
USB Network port.
• Do not insert a USB memory stick or similar device into the rear-panel
USB Network port. The port will work only with a USB network adapter
like the one supplied with the receiver.
