12
connecTing The fM AnTennA
Connect the supplied antenna to the FM Antenna connector, as shown in
the illustration below. Fully extend the antenna wire and move it to different
positions until you get the best reception for your favorite stations.
FM Antenna
(supplied)
connecTing A TV or Video diSplAy
Use an HDMI cable (not supplied) to connect the receiver’s HDMI output to
your TV/video display’s HDMI input.
NOTE: If you have devices (such as an Internet modem) already connected
directly to your TV, you can feed their sound to the receiver via the HDMI
Monitor Out connector’s Audio Return Channel, and they will not require
additional connections to the receiver.
HDMI Cable
(not supplied)
Tv
Composite
video Cable
(not supplied)
Use this
connection if
your Tv does
not have an
HDMI connector
Use this
connection
if your Tv
has an HDMI
connector
NOTE: The HDMI connection will deliver both video and audio to your TV
or video display. We suggest disabling your TV or video display’s audio
system to take full advantage of your Cinema BD system’s superior audio
reproduction.
connecTing your hdMi Source deViceS (Bd300 only)
If you have any source devices with HDMI connectors, using them will
provide the best possible video and audio performance quality. Since the
HDMI cable carries both digital video and digital audio signals, you do not
have to make any additional audio connections for devices you connect via
an HDMI cable.
HDMI-Equipped Source Device
To HDMI
output
HDMI Cable
(not supplied)
connecTing your opTicAl digiTAl Audio Source deViceS
If one of your non-HDMI source devices has a optical digital output,
connect it to the receiver’s Optical Digital Input connector. NOTE: Make only
one type of digital connection (HDMI, optical or coaxial) from each device.
To optical Digital
Audio output
optical Digital Audio
Cable (not supplied)
optical-Equipped Source Device
Remove Caps
