![background image](http://html1.mh-extra.com/html/jb-systems/led-quadra-beam/led-quadra-beam_operation-manual_3514965007.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
5/47
SUPER QUADRA BEAM
HOW TO SETUP:
MAIN MENU:
To select any of the menu options, press the
MENU
button up to when the required option is shown on
the display.
Select the function with the
ENTER
button. The
display will blink.
Use DOWN and UP button to choose the desired
menu option.
Once the required menu option is selected, press
the
ENTER
button to select.
Press the
MENU
button for about 2 seconds to
store the setting and to return to running mode. If
you don’t do this, the setting will not be stored and
after about 8 seconds, the fixture will return to the
previous running mode.
DMX512 Address Setting
Used to set the start address in a DMX setup.
Press the MENU button until
is shown on
the display.
Press the ENTER button to select.
Use DOWN and UP buttons to change the DMX512
address.
Once the correct address is shown on the display,
press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to
store the setting and to return to running mode.
Channel Mode
The unit has 2 different channel modes. Refer to
the DMX-chart to see the differences.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select one of the available channel modes.
Once the mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to store the setting and to return to running mode.
Show Mode
Used to select one of the preprogrammed shows when used in standalone or master/slave mode.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP buttons to select one of the preprogrammed shows:
all shows played at random.
to
12 different built-in shows.
Once the right show is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to store the setting and to return to running mode.
Slave Mode
By choosing the right slave mode you can improve the impact of the shows.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select slave mode 1 or slave mode 2.