![background image](http://html1.mh-extra.com/html/sun-system/1000-de-boss/1000-de-boss_installation-and-operating-instructions-manual_1393218001.webp)
READ THESE INSTRUCTIONS BEFORE FIRING UP YOUR BALLAST
®
Sun System
®
1 Ballasts are controller-compatible
with signal ports for on /off /dimming functions
(Etelligent
™
controller sold separately. Part # 902245 )
ETELLIGENT
CONTROLLER
compatible
Product # 906612 Sun System
®
1000 Watt DE Boss
®
Commercial Fixture 277 Volt
600W
750W
1000W
Turbo
750W
660W
600W
SIG
A
INPUT
SIG B
ww
w.
Ha
wt
ho
rn
eG
C.
co
m
RC
825W
1000W
1150W
Includes hard-wired 277 volt
power cord with a L7-15p 277
volt twist lock power plug.
1000 DE BOSS
®
COMMERCIAL FIXTURE
Installation
&
Operating Instructions
KEEP ORIGINAL PACKAGING:
All returns need to be in the original packaging in order to
avoid product damage during shipping. Any damage to products not in their original packaging
will not be covered under warranty.
SAFETY FIRST!
Failure to observe the following safety warnings may result in serious injury. In addition, failure to
observe these safety warnings will result in a waiver of all liabilities and will void all warranties.
WARNING:
If the exterior of the lamp is damaged, replace lamp immediately.
When relamping, make sure lamp has time to cool before touching.
Make sure power cord is connected properly.
Disconnect power before relamping.
DO NOT
hang by power or lamp cord.
DO NOT
make contact with the interior of the socket while power is on.
DO NOT
operate light systems in wet locations.
DO NOT
plug system into supply voltage other than what is designated on ballast.
DO NOT
attempt to rewire or reconfigure your system, it will void warranty and could cause
serious safety hazards (i.e. power cord, lamp cord, lamp socket or ballast).
Keep away from children.
Full warranty detail within.