![background image](http://html1.mh-extra.com/html/jb-systems/led-quadra-beam/led-quadra-beam_operation-manual_3514965009.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
7/47
SUPER QUADRA BEAM
Fixture Hours
Used to show the number of working hours of the unit.
Press the
MENU
button until
is shown on the display.
Press the
ENTER
button to show the number of working hours in the display.
Press the
MENU
button for about 2 seconds to return to running mode.
Software version:
Used to show the software version of the unit.
Press the MENU button until
is shown on the display.
Press the ENTER button to show the software version of the unit.
Press the
MENU
button for about 2 seconds to return to running mode.
OPERATING INSTRUCTIONS
A. Standalone 1unit:
Just connect the projector to the mains.
Select one of the automatic show modes
Don’t forget to set the Blackout mode to ‘NO Blackout’ or nothing will happen.
Refer to chapter HOW TO SETUP to learn how to make the previous settings.
Remark:
You can connect a CA-8 remote controller to the unit if you want to have more control.
B. Two or more units in master/slave setup:
Connect 2 or more
units together. Refer to the chapter “electrical installation” to learn how to do this.
Set the master mode for the first unit and select one of the shows.
Set the slave mode for all the other units: each slave projector can be set to its specific slave mode
(see chapter HOW TO SETUP the slave mode)
Connect all units to the mains and put on some music. The units will start working automatically to the
rhythm of the music and show the internal programs.
Don’t forget to set the Blackout mode to ‘NO Blackout’ or nothing will happen.
Remark:
You can connect a CA-8 remote controller to the master unit if you want to have more control
over the master/slave operation.
C. Connect the optional CA-8 controller for more control:
The CA-8 controller can only be used in standalone or master/slave mode. Connect the controller to the
CA-8 input of the first unit (master). Now you can control all the connected units:
BUTTON
ACTIONS
STANDBY
To blackout all the fixtures
FUNCTION
1.Synchronous strobe
2.Sound strobe in white
3.Sound strobe in color
Select one of the different show modes.
MODE
Strobe
(LED OFF)
Show
(LED ON)
D. Controlled by universal DMX-controller:
Connect all the
units together. Refer to the chapter “Electrical installation for two or more units in DMX-
mode”. To learn how to do this (don’t forget to address all the units properly!)
Connect all the units to the mains and turn on the DMX controller.
Since each unit has its own DMX-address, you can control them individually. Remember that each unit
uses 1 or 3 DMX-channels as shown in the DMX charts below: