![background image](http://html1.mh-extra.com/html/jb-systems/led-quadra-beam/led-quadra-beam_operation-manual_3514965010.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
8/47
SUPER QUADRA BEAM
1 CHANNEL MODE
SHOW
VALUE
FUNCTION
248-255
RANDOM
218-247
SHOW 8
188-217
SHOW 7
158-187
SHOW 6
128-157
SHOW 5
098-127
SHOW 4
068-097
SHOW 3
038-067
SHOW 2
008-037
SHOW 1
000-007
OFF
3 CHANNEL MODE
1 - SHOW
2 - SPEED
3 - STROBE
VALUE
FUNCTION
VALUE
FUNCTION
VALUE
FUNCTION
248-255
RANDOM
248-255
AUDIO
TRIGGER
255
FAST STROBE
218-247
SHOW 8
247
FAST
188-217
SHOW 7
158-187
SHOW 6
128-157
SHOW 5
008-247
MANUAL
098-127
SHOW 4
SPEED
CHANGE
068-097
SHOW 3
068
SLOW STROBE
038-067
SHOW 2
038-067
SOUND
STROBE
008-037
SHOW 1
008
VERY SLOW
008-037
RANDOM
STROBE
000-007
OFF
000-007
HOLD (stop)
000-007
NO STROBE
Important:
Never loo
k directly into the light source! Don’t use the effect in the presence of persons
suffering from epilepsy.
MAINTENANCE
Make sure the area below the installation place is free from unwanted persons during servicing.
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.