JB-Lighting Sparx 18, Руководство по эксплуатации

Страница: 8 / 48

- 08 -
18
/
Wire colour Function Symbol
Brown Phase “L”
Blue Neutral wire “N”
Green/Yellow Protective earth “PE”
3. Installation
2.2 Unpacking the device
Contents of the packaging: This spotlight, two Omega brackets with bayonet fasteners, Powercon
cable and these instructions once per delivery.
Open the packaging at the top and remove the inlay and the two Omega brackets. Check
the Sparx 18/30 for any transport damage. This should be communicated immediately to the
transport company.
ATTENTION: Only have plugs installed by a specialist!
!
The Sparx 18/30 spotlight is supplied with a partially assembled power cable with the powerCON-
TRUE1 plug (only the powerCON-TRUE1 plug is included in the US version).
The installation of the safety plug or the connection of the Sparx 18/30 to the power supply (100-
240 Volt, 50 - 60 Hertz) must be carried out by an authorised specialist.
Connection in Germany/Europe:
3.1 Fitting the plug to the connection cable
The maximum ambient temperature of 45°C must not be exceeded.
Do not operate the device until you have become familiar with its functions. Prevent operation by
persons who are not qualified to use the device. Most damage is the result of improper operation!
Please use the original packaging or specially adapted flight cases if the device is to be
transported. When using the original packaging, the tilt lock must not be closed!
ATTENTION: The distance between the light emission and the surface to be
illuminated must be at least 2.0 metres.
ATTENTION: The front pane must be replaced if it is visibly damaged to the extent
that its function is impaired, e.g. by cracks or deep scratches!
ATTENTION: To avoid damaging the internal parts of the light head, never let sunlight
shine directly into the front pane.
!
!
!