JB-Lighting P 12, Руководство по эксплуатации

Страница: 35 / 40

- 35 -
P12 Wash
7.7 Testing of electrical equipment
According to the German Social Accident Insurance (DGUV) Regulation 3 / Regulation 4, electrical
systems and equipment must be subjected to regular inspections. The fixing screw of the DMX
5-pin socket can be used as measuring point for insulation and residual current measurement.
The screw is connected to all sheet metal parts via a contact washer.
PE measuring point
7.6 Service and maintenance
On the P12 Wash, the zoom / focus guide rails and the rotating gobos should be checked for
sufficient lubrication at regular intervals - once a year. To do this, open the head cover (4x cam-
locks with half a turn), the zoom cover (3 Phillips screws) see (4) and remove the gobo insert (2
knurled screws).
Please note that the rotating gobos and the guide rails do not run dry; if necessary, the rotating
gobos must be oiled with a special syringe and the guide rails with a brush with our special sil-
icone oil.
After the gobos and the rails have been checked or oiled, reinsert the slot and close the zoom
cover again. After completing the work, replace the head cover on the headlight and test all the
functions of the headlight.