JB-Lighting P 12, Руководство по эксплуатации

Страница: 34 / 40

- 34 -
P12 Wash
7.5 Software update
The P12 Wash can be updated via a USB stick with micro-USB connection. To do this, copy the
file directly into the root directory of the USB stick. Then press and hold the right key below the
display, switch on the power of the P12 Wash, as soon as the message “Insert USB stick” ap-
pears on the display release the key. Now plug in the USB stick on the back of the device below
the signal connections and follow the instructions on the display. The P12 Wash completes the
software update with a reset. You will find the latest software on our homepage.
7.4 Cleaning the device
You should check the function of the fans in
the head and foot at regular intervals. Above all,
make sure that the air intakes and the interior
of the P12 Wash are free of fluff and dust.
To do this, open the head cover (4x camlocks
with half a turn) and the base plate on the foot.
You can clean the P12 Wash with a brush and
a vacuum cleaner. In addition, you can remove
the gobo insert (1) and the shutter slide insert (2)
by loosening the knurled screws (3) and sliding
the focus carriage towards the lens. Then you
can clean the colour filters, glass gobos and
CMY panes with a soft cloth and a little window
cleaner. To clean the frost flaps, zoom/focus unit,
remove the four Phillips screws (4) and then the
cover. Ensure that you do not bend or damage
any parts during cleaning. When cleaning is
complete, reconnect the flap, replace the Phillips
screws (4) and return the inserts to the unit.
22
11
33
4 4
WARNING: Disconnect fixture before opening!
!