JB-Lighting P 12, Руководство по эксплуатации

Страница: 29 / 40

- 29 -
P12 Wash
Via the control channel different functions of the fixture can be permanently switched. The follo-
wing functions can be switched via the control channel.
Response of the headlamp when dimming via faders
BACKLIGHT MODE - display backlight
DISPLAY ORIENTATION - display orientation
MAIN SCREEN MODE - main screen view
USER FIXTURE ID SET - set headlight number
DIMMER CURVE - dimmer curve adjustment
FROST CURVE - setting the frost curve
PAN / TILT SPEED - pan / tilt speed
EFFECT SPEED - effect speed
LED FADE OUT MODE - type of dimming
COOLING MODE - adjust the fan volume and brightness
CAMERA MODE - sets the LED refresh rate
RESET - a basic reset of the headlight is performed
For details, see DMX Channel functions for the P12 Wash on page 23.
6.1.3 Control channel
Animation effects can be created via this channel in connection with the focus. Depending
on the intensity, the projection can be made to shake more or less. This effect can be dimmed
or switched.
6.1.4 Sparkle effect, sparkle speed
With the aid of the two channels Autofocus Distance and Autofocus Adjustment, the focus can
be automatically readjusted over the entire zoom range from software version 1.5
6.1.5 Zoom, auto focus distance, auto focus balancing
6.2 Artnet
The spotlight can be controlled via Artnet - ArtNET 4. To do this, set the Artnet address via the
menu item DMX / NET ADDR -> ARTNET ADDRESS and also select it via the menu item PER-
SONALITY -> DMX INPUT CONFIG -> NETWORK -> MODE -> ARTNET. In addition, define the
IP address of the spotlight via PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> IP AD-
DRESS. Further details and setting options can be found on page 16
6.3 Streaming ACN
The headlight can be controlled via sACN - Streaming ACN. To do this, set the sACN address
via the menu item DMX / NET ADDR -> SACN ADDRESS and also select it via the menu item
PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> MODE -> SACN. In addition, define
the IP address of the spotlight via PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> IP
ADDRESS. Further details and setting options can be found on page 16
6.4 Wireless-DMX
The P12 is equipped with a Lumen Radio CRMX receiver for wireless DMX. The receiver can
process both DMX and RDM. If there is a cable and wireless connection to the P12, the cable
connection has priority! The received signal can be output via the DMX connection. To do this,
set the DMX OUTPUT CONFIG setting to ON in the PERSONALITY menu. After confirming with
ENTER, the spotlight will output the entire universe received via wireless DMX.