JB-Lighting P 12, Руководство по эксплуатации

Страница: 30 / 40

- 30 -
P12 Wash
The P12 supports the RDM PIDs (parameter IDs) required by ESTA as well as manufacturer-spe-
cific PIDs.
6.5.2 RDM-PIDs
6.5 RDM
The P12 can communicate via RDM (Remote Device Management) in accordance with ESTA
American National Standard E1.20-2006. RDM is a bidirectional communication protocol for use
in DMX512 control systems. It is the open standard for the configuration and status monitoring
of DMX-512 devices. The RDM protocol enables data packets to be inserted into a DMX-512
data stream without affecting existing non-RDM devices. It enables a console or dedicated RDM
controller to send commands to specific devices and receive messages. The P18 can send
and receive RDM via DMX and Artnet 4. The spotlight is also designed to send RDM via sACN
and receive it via Artnet. The RDM functionality depends on the lighting control desk used, the
operating instructions of the respective desk manufacturer must also be observed.
Every P12 has a factory-set RDM-UID (unique identification number), which makes it addressa-
ble and identifiable in RDM systems.
6.5.1 RDM-UID
6.5.3 Standard RDM parameter IDs
RDM parameter ID GET SET DISCO-
VERY
Note
RDM identification
DISC_UNIQUE_BRANCH
✔
is used for fixture identification
DISC_MUTE
✔
is used for fixture identification
DISC_UN_MUTE
✔
is used for fixture identification
RDM status determination
QUEUED_MESSAGE
✔
STATUS_MESSAGES
✔
STATUS_ID_DESCRIPTION
✔
CLEAR_STATUS_ID
✔
RDM information
SUPPORTED_PARAMETERS
✔
RDM configuration
DEVICE_MODEL_DESCRIPTION
✔
MANUFACTURER_LABEL
✔
FACTORY_DEFAULTS
✔
SOFTWARE_VERSION_LABEL
✔
DMX_PERSONALITY
✔
DMX_PERSONALITY_DESCRIPTION
✔
DMX_START_ADDRESS
✔
SENSOR_DEFINITION
✔
DEVICE_HOURS
✔
LAMP_HOURS
✔
IDENTIFY_DEVICE
✔
RESET_DEVICE
✔
PERFORM_SELFTEST
✔
SELFTEST_DESCRIPTION
✔