which is not necessarily the capacity of the
cargo bay. Do not exceed this maximum
weight rating at any time. The cargo ramp door
is spring assisted to aid in opening and closing
the ramp door.
To open the ramp door
Select a site for unloading that will provide a
level/flat surface for the ramp door to rest on.
Make sure the RV wheels are blocked to
prevent the trailer from moving. Make sure
there are no people, pets or equipment in the
way when opening the ramp door.
5. Lessen the transition angle between the
rear of the cargo floor and the cargo door
ramp by using the tongue jack to raise the
front of the trailer. To prevent damage to
the ramp door and extension ramp this
should be done prior to lowering the cargo
ramp door.
6. Unlock the exterior
vise latches securing
the bar latch handles.
7. Push up on the bar
latch
handles
that
hold the ramp door in
place.
8. Move the bar latch handles to the outside
of the trailer to avoid contact when opening
the ramp door.
9. Using caution, pull the ramp door open.
Support the ramp door at all times and do
not let it drop to the ground.
The following label should remain permanently
attached to the transition ramp plate:
To close the ramp door
As the trailer is being loaded, make sure that
stored vehicle(s) and/or equipment do not
damage the ramp door seals. Remove any
debris (sand, snow, etc.) from around the ramp
door before closing it. To close the ramp door,
reverse the above listed process. Secure the
ramp door by locking the vice latches.
Do not move the RV until the cargo ramp door
is secured. Inspect all ramp door components
each trip for wear or damage.
For safety,
contact
your
RV
dealer
for
a
service
appointment if repairs are needed.
A
IR
V
ENTS
Your RV is equipped with air vents in the
sidewall of the cargo bay area. These air vents
are designed for airflow and ventilation when
there is fuel powered equipment present in the
cargo bay. These air vents must remain open
76
SECTION 10
CAMPING & OPERATING
WARNING
Do not load or unload your RV without first
blocking all wheels to prevent trailer
movement. Movement during loading or
unloading may cause the cargo ramp door
to shift and tongue jack to bend. Failure to
properly block wheels may result in the loss
of control, property damage, injury or
death.
Fig. 10.11 Ramp
door latches
WARNING
Do not sleep in the cargo bay area while
internal combustion engines are being
operated, stored or transported in the RV.
Failure to comply may result in death or
serious injury.
THE TRANSITION RAMP PLATE MUST BE IN
THE VERTICAL (UP) POSITION WHEN THE
RAMP DOOR IS SET HORIZONTAL AND USED
AS A PLATFORM OR IN PATIO SCREEN
POSITION. FAILURE TO COMPLY MAY
RESULT IN INJURY OR DAMAGE TO THE
TRAILER COMPONENTS.
JA-192
WARNING
Fig. 10.12 Cargo ramp transition label
Содержание 2008 Octane ZX
