Jayco 2008 Octane ZX, Руководство пользователя

Страница: 26 / 104

pin box is adjustable for variance in trucks and
truck suspension systems.
S
WAY
C
ONTROL
(C
USTOMER
S
UPPLIED
)
Sway control devices are available to reduce
the
sway produced by crosswinds, air
displacement caused by other vehicles
passing you in transit, incorrect weight
distribution, excessive speed, the RV tires
dropping onto the shoulder of the road, etc.
You will also want to discuss this purchase with
your dealer.
The use of a sway control device will help to
control the side-to-side movement and keep
sway in check.
Suggestions for sway situations:
0
Slowly ease your foot off the accelerator.
0
Turn the steering wheel as little as
possible. Natural lag time reaction when
counter-steering to correct sway could
possibly make it worse.
0
If the trailer is equipped with electric
brakes, using the hand control will help to
keep the vehicles aligned.
0
As soon as possible, stop to determine the
cause of the sway. Check all equipment
and load distribution. If the problem cannot
be
solved immediately, contact your
dealer for a service appointment (travel at
a very reduced speed on your way there).
W
EIGHT
D
ISTRIBUTING
S
YSTEM
(C
USTOMER
S
UPPLIED
)
A weight distributing hitch system provides a
more stable tow vehicle/RV combination. This
system will spread the weight evenly to
distribute it to the tow vehicle front and rear
axles and the trailer axle. Consult with your
dealer to familiarize yourself with the operation
and requirements of the weight distributing
hitch system. Be certain your tow vehicle can
carry the hitch weight.
RV B
RAKE
S
YSTEM
The electric brakes are designed to work with
the tow vehicle brakes. To maintain proper
braking performance, both the RV and tow
vehicle
brakes must be used together.
Separate use of the braking systems will
cause accelerated wear and damage.
When your RV is new, it is impossible to
adjust the brake shoes precisely. It takes
approximately
1,000 miles and/or 50
medium to heavy stops to “burnish” fit or
“seat” the shoes to the brake drum. After
the initial break-in period your brake shoes
must be adjusted accurately for best
performance and increased durability.
Braking system components include:
0
Tow vehicle battery
0
Brake controller
0
Wire harness/connector plug
0
Trailer battery
0
Breakaway switch
Tow vehicle battery
The tow vehicle battery is the primary source
of
power for your RV's electric brake
operation. To ensure available power when
needed, keep your tow vehicle battery and
charging system working properly.
22
SECTION 3
PRE-TRAVEL INFORMATION
WARNING
A sway control device (customer supplied)
should be used with your tow vehicle/travel
trailer combination. Consult with your
dealer to obtain the proper equipment for
your needs.
WARNING
Failure to maintain the brakes in proper
working condition as specified in the
operator’s manual supplied by the axle
OEM will cause property damage, personal
injury and possibly death. Consult with your
dealer for assistance.