AAA-055-00012
Jaylor Operator’s Manual
- 31 -
Single Auger Trailer Units
Dual Discharge – 8’ (96”) or 9’-2” (110”) Conveyors
On machines equipped with dual side unloading, the conveyor will unload on either side of the
machine. The conveyor is operated by using the controls on the tractor, for left and right
discharge. (The conveyor will reverse from its direction of discharge, when the remote is moved
to the opposite position)
Figure 11 - 8" Flat Dual Discharge Conveyor
Right/Left Discharge – 6’ Flat w/ Height Adjustable Wing Conveyor
Machines that are equipped with right or left discharge have a section of the conveyor that can be
raised and lowered. Depending on the options on your Jaylor, raising and lowering the conveyor
can be done hydraulically or manually.
For models equipped with a manual lift, the conveyor
must
be stopped in order to raise and lower
it. A turnbuckle assembly is used to adjust the wing conveyor height. Simply turn the body on
the turnbuckle clockwise or counterclockwise, depending on whether the wing is to be raised or
lowered.
For models equipped with hydraulic lift discharge, there are two available options for the conveyor
operation. One system employs the Lock Collar System. Machines equipped with this system
have cylinder lock collars supplied with the equipment. The collars are each different sizes, and
are stacked on the lift cylinder’s stroke. The number of lock collars used determines the lowering
height of the wing. Once the desired height is set, the conveyor is lowered (cylinder retracts) until
it bottoms on the lock collar(s). The hydraulic plumbing is designed such that at this point the
