AAA-055-00012
Jaylor Operator’s Manual
- 24 -
Single Auger Trailer Units
On the bottom of the indicator are 3 outlets for attaching the 3 weighbar cords. These should not
be confused with the power supply, which will not attach in the same outlet. The weighbar cords
are pushed in, and then the tightening ring threaded into place. Make sure that the plugs are free
of moisture or other contaminants, as this will affect the performance of the weighing system.
On standard models, the power cord is to be plugged into the tractor female receptacle, which
should be mounted on your tractor, getting its power supply from the tractor’s electrical system.
This should be a 12-volt negative ground power supply.
Figure 5 - Adjustment of Scale Mounting Bracket Arm Assembly.
Figure 6 – Typical Scale Indicator
