Jay electronique OREi21SL1, Инструкция по установке и эксплуатации для пользователя

Страница: 47 / 140

Gb Fr
324501E
revision02
- 47 -
De
1- General safety rules
A radio remote control is considered as a machine control device . All
applicable rules must therefore be observed to ensure safe, correct
operation of such devices.
For maximum safety when using the radio remote control, we
recommend that the operator carefully follows the instructions provided
in this manual.
z If several radio controls are used on the same site, different radio
frequencies should be used, spaced by at least two channels (for
example, channels 5, 7, 9, etc.).
The more space there is between the chosen radio channels, the
less the risks of disturbance are (1) .
z The operator must be appropriately trained and certified to
operate machines by radio remote control.
z The operator must have uninterrupted visibility of the manoeuvre
which he is performing. When the operator's direct field of view is
inadequate, the controlled equipment must be equipped with auxiliary
devices to improve visibility.
When several machines are being moved simultaneously, the
equipment must be fitted out to limit the consequences of a possible
collision.
z Do not forget to replace batteries or recharge accus when
discharged.
z Service your equipment and perform all periodic checks as may
be required by the intensity with which your equipment is used.
(1) = The programming of another radio channel number can only be done with a
transmitter equipped with an "On/Off» button.
z
Before use, it is indispensable to modify and
to personalize the setting of the transmitter
and receiver to insure the uniqueness of the
installation (see chapter 5).