Javad TRIUMPH-VS Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 96

background image

Preface

Regulatory Information

Canadian Emissions Labeling Requirements

7

www.javad.com

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.

If this equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Move the equipment away from the receiver.
• Plug the equipment into an outlet on a circuit different from that to which the receiver is powered.
• Consult the dealer or an experienced radio/television technician for additional suggestions.

Note:

Any changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void your authority to operate such equipment.

Canadian Emissions Labeling Requirements

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.

WEEE Directive

The following information is for EU-member states only:

The use of the symbol indicates that this product may not be treated as household waste. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about the take-back and recycling of this product, please contact
your supplier where you purchased the product or consult.

«
...
5
6
7
8
9
...
»

Содержание TRIUMPH-VS

































































































Отзывы:

Нет отзывов

Похожие инструкции для TRIUMPH-VS

Portable CD Player

Бренд: Jensen Страницы: 12

Radio Shack Realistic PRO-2021

Бренд: Tandy Страницы: 46

Бренд: tbs electronics Страницы: 15

Бренд: Webasto Страницы: 88

Бренд: Horizon Hobby Страницы: 23

Бренд: Yaesu Страницы: 39

Бренд: Icom Страницы: 40

Бренд: Power Acoustik Страницы: 16

Бренд: Arylic Страницы: 4

Бренд: Allo RemoteControl Страницы: 2

FT-450 - CAT OPERATION REFERENCE BOOK

Бренд: Yaesu Страницы: 18

Бренд: RadioMaster Страницы: 2

Бренд: Nakamichi Страницы: 13

Бренд: Velleman Страницы: 15

HD-RX-4K-x10-C-E

Бренд: Crestron Страницы: 56

Бренд: THOMSON Страницы: 23

Бренд: Topfield Страницы: 64

STINGER STXJLSBA

Бренд: AAMP Global Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды