Javad TRIUMPH-VS, Руководство оператора

Страница: 66 / 96

Description and Operation
Operation in RTK Mode
Point survey
66 www.javad.com
5.4. Point survey
This mode allows the surveyor to collect pickets or points. If you’re surveying with a pole, put it at the
desired point. At the top of the screen is displayed the name of the object. If you tap on this field, you can
change/enter a name for the point and the layer in which it will be stored.
Figure 105. Point survey
Press the Action (FN) button, the Command screen will be opened. Tap Start to begin the surveying, then
either wait for complete survey, or tap Stop at the end.
The point name will be incremented after the surveying, so is it possible to survey the points in the
command screen only, without switching to other. If you want to change the point name, return to the
Action screen and change the name there.
During the point survey, it is possible to enable the cameras to take pictures or record a voice note. Using
the Justin Link software these voice notes can be converted into codes for objects or other values??, such
as the height of the antenna, comments, etc.
The results of the survey are the files with “raw” measurements, saved into receiver’s memory and a map
with surveyed points. To transfer all data to the PC use free JAVAD GNSS software Justin Link. THe
receiver should be connected to PC through Center of the connected mobile devices (for Windows 7) or
Active Sync (for Windows XP).
Now you can either create a new Justin Link project, or add new data to an existing one.
To download raw files from receiver’s memory, click the button, to download the files from the
controller and for RTK measurements from the map click button on the Justin Link menu.