Javad TRIUMPH-1, Руководство оператора

Страница: 59 / 162

Configuration
Configuring the Receiver
Configuring the External UHF Modem
59
www.javad.com
4. In the General tab click Set all parameters to defaults and set up the antenna parameter:
Auto, Internal or External, when external antenna is used.(Figure 3-14).
Figure 3-14. Set all parameters to defaults
5. Click the MinPad tab and configure the following settings (Table 3-6), then click Apply
(Figure 3-15 on page 60).
Table 3-6. Receiver Parameters for the MinPad Tab
Parameter Base Receiver Rover Receiver
Recording interval Enter 15 seconds.
Elevation mask angle Enter 15 degrees.
File name prefix Enter a unique ID, such as the last 3 digits of receiver’s serial number.