MANUAL DE INSTRUCCIONES • INSTRUCTIONS MANUAL • MANUAL DE INSTRUÇÕES
36
(1) Make the marks of buttonhole carefully on the
material.
(2) Pull forward slide (A), keep the mark (C) on it
in conformity to the initial mark (B). The mark on
the presser foot should be aligned with that of the
material... Lower the presser foot.
Instruction: Marks on the slide should be carved
in cm.
(3) Adjust stitch selection dial to . Keep stitching
forward until come to the marks in front of the
buttons and then stop sewing with needle pausing
at lower right.
(4) Adjust stitch selection dial to . Make 4-6
stitches before stopping sewing with needle
pausing at lower left.
(5) Adjust stitch selection dial to . Keep stitching
backward until come to the marks at the back of
buttons and then stop sewing with needle pausing
at top left.
(6) Adjust stitch selection dial to . Make 4-6 stit-
ches before stopping sewing with needle pausing
at top right.
(7) After sewing buttonholes, take out fabrics.
Insert a pin at the back hole of buttonhole so that
the end of thread of buttonhole will not be cut off
mistakely. Cut out the buttonhole carefully with a
buttonhole cutter.