Jaspi Inverter Nordic 8, Руководство по установке

Страница: 9 / 68

Assembly
■
Place JÄSPI Inverter Nordic outdoors on a solid level
base that can take the weight, preferably a concrete
foundation. If concrete slabs are used they must rest
on asphalt or shingle.
■
The lower edge of the evaporator must not be lower
than the level of the average local snow depth. The
base should be at least 70 mm tall.
■
JÄSPI Inverter Nordic should not be positioned next
to noise sensitive walls, for example, next to a bed-
room.
■
Also ensure that the placement does not inconveni-
ence the neighbours.
■
JÄSPI Inverter Nordic must not be placed so that recir-
culation of the outdoor air is possible. Recirculation
entails reduced power and impaired efficiency.
■
The evaporator must be sheltered from direct wind / ,
which negatively affects the defrosting function. Place
JÄSPI Inverter Nordic protected from wind / against
the evaporator.
■
A small amount of water may drip from the drainage
hole under JÄSPI Inverter Nordic. Make sure that this
water can run away by selecting a suitable material
underneath JÄSPI Inverter Nordic (see section "Con-
densation").
■
Care must be exercised so that the heat pump is not
scratched during installation.
LEK
F2120
min 300 mm
LEK
F2120
LEK
min
70 mm
Do not place JÄSPI Inverter Nordic directly on the lawn
or other non solid surface.
If there is a risk of snow slip from roof, a protective roof
or cover must be erected to protect the heat pump, pipes
and wiring.
9 Chapter 2 | Delivery and handling JÄSPI Inverter Nordic