Jaspi Inverter Nordic 8, Руководство по установке

Страница: 23 / 68

Connections
Power connection
The enclosed cable (length 1.8 m) for incoming electricity
is connected to terminal block X1. Outside the heat
pump there is approx. 1.8 m of cable available.
Connection 1 x 230 V
L1 L2 L3 PE N
X1
Connection 3 x 400 V
L1 L2 L3 PE N
X1
At installation, install the screwed connection on the
rear of the heat pump. The part of the screwed joint that
tensions the cable must be tightened to a tightening
torque above 3.5Nm.
LEK
Data
Serie.nr
.
Art.nr . 71145
3
OUT
IN
LEK
Incoming supply
Connection
23 Chapter 5 | Electrical connections JÄSPI Inverter Nordic