Jasco V-530, Руководство по оборудованию/функциям

Страница: 5 / 48

iv
Regulatory Statement
CE Notice
The symbol indicates compliance of this JASCO system to the EMC (Electromagnetic
Compatibility) and Low Voltage Directives of the European Community. This symbol indicates that
this JASCO system meets the relevant basic safety and health requirements of the EC Directive
based on the following technical standards:
•
EN55011 -- "Industrial, scientific and medical (ISM) radio-frequency equipment – Radio
disturbance characteristics – Limits and methods of measurement" -- Group 1, Class A.
WARNING! : This is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to take
corrective measures.
•
EN61000-6-1 -- "Electromagnetic compatibility (EMC) Part 6-1:Generic standards – Immunity
for residential, commercial and light-industrial environments"
•
IEC61000-3-2 -- "Electromagnetic compatibility (EMC) Part 3-2:Limits – Limits for harmonic
current emissions (equipment input current up to and including 16A per phase) "
•
IEC61010-1 -- "Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 1:General requirements"
•
A "Declaration of Conformity" in accordance with the above standards has been made and is on
file at JASCO EUROPE srl, Via Confalonieri 25, 22060 CREMELLA (LC), Italy.
FCC Statement (for USA only)
Federal Communications Commission Radio Frequency Interference Statement
WARNING! : This equipment generates, uses, and can radiate radio frequency
energy. If it is not installed and used in accordance with the instruction
manual, it may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device
pursuant to Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential
area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be required to
correct the interference.