Raising or Lowering the Presser Foot
By raising or lowering the presser foot lifter, the
presser foot goes up or down.
*
While in operation, keep the presser foot lowered
except when threading the machine or test
q
running without threads.
Thread tension will be released when the presser
foot lifter is raised.
w
q
Presser foot
w
Presser foot lifter
Removing the Presser Foot
w
1. Turn off the power switch and unplug the
q
machine.
2. Raise the needle and the presser foot.
3. Press the lever located on the back of the foot
r
e
holder. The presser foot will drop off.
q
Needle
w
Presser foot lifter
e
Foot holder
r
Lever
e
q
w
r
2.8 mm
w
Attaching the Presser Foot
1. Turn off the power switch and unplug the
machine.
2. Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder.
3. Lower the foot holder to lock the foot into place.
4. Raise the presser foot lifter to check that the
presser foot is secure.
q
Foot holder
w
Groove
e
Pin
Adjustment of Foot Pressure
It is not necessary to adjust the presser foot’s
pressure for normal sewing.
When you sew heavy or lightweight fabrics, turn the
adjusting screw:
–– clockwise for heavyweight fabric.
e
q
–– counterclockwise for Iightweight fabric.
*
For normal sewing, set the adjusting screw so
that it sits 2 mm below the top of the machine.
See the illustration.
q
To decrease
w
To increase
e
Adjusting screw
r
Top of the machine
20
Содержание MyLock 744D
Страница 1: ...INSTRUCTION BOOK MANUEL D INSTRUCTIONS INSTRUKCJA OBS UGI MODEL MOD LE MODEL 744D...
Страница 102: ...99...
Страница 105: ...Printed in Taiwan 794 800 505 E F S...